Ronco 5270 Series EZ-Store Stainless Rotisserie Oven - Manual (Page 8)

EZ-Store ™ Rotisserie
GEttInG stArtED
(cont’d)
5. SPIT ROD ASSEMBLY: One end of the spit rod is held in place by a WIRE CLIP installed
on Gear Wheel A. Insert the notched end of the SPIT ROD into Gear Wheel A while
squeezing the WIRE CLIP together. The SPIT ROD is secure when the WIRE CLIP snaps
into the notch. Repeat with second SPIT ROD. Insert pointed ends of SPIT RODS into
Gear Wheel B. Place SPIT ROD ASSEMBLY inside the Rotisserie base.
cArEFuL!
removable gear wheels (A & B) fit on the Spit Rods after food (or Basket) is loaded in
place.
It is heavy and has sharp gear teeth. When carrying the spit rod Assembly
always carry Gear Wheel B upward so it won’t fall off.
Use
cAutIon. Tips are sharp. Please be very careful with your hands when loading any
food onto the Spit Rods.
8
QUICK SET-UP GUIDE (cont’d)
Notched End of Spit Rod
Wire Clip
A
B
IMportAnt:
Before First use, be sure the Rotisserie is not plugged in. Wash and dry the removable
parts in warm soapy water. Never immerse the machine or the cord in water. Keep at
least 8” (inches) of clearance on top and 8 inches all sides and do not place it under a
cabinet when in use. A little smoking is normal the very first time you use your machine.
read the retain this instruction booklet for future reference regarding instruction
and safeguards.
Never cook foods larger than recommended for your model of E-Z Store
™ Rotisserie.