Lexicon MX200 - Manual (Page 29)

M MXX220000 U Uttiilliittiieess
The MX200 has several global functions
that can be customized to meet your
needs. These functions are MIDI Channel
Select, Program AutoLoad enable, Dry
Track to digital output, Analog/Digital
Input Select, and Factory Reset. To
access these Utility functions, press and
hold both the Store and Audition buttons
simultaneously until the Audition button
LED begins to flash. The Program Display
reads Ut to indicate that you are in Utility
mode rather than Program mode.
Navigation between Utility functions is con-
trolled by pressing the Audition button;
changes are made by turning the Program
Select knob.
MIDI Channel
The MX200 is capable of receiving incom-
ing MIDI Program Change and CC
(Continuous Controller) messages via a
MIDI or USB connection. The MX200 can
be set to receive on any single MIDI chan-
nel, all MIDI channels, or can have MIDI
receive disabled.
To select the MIDI channel:
1. Press both the Store and Audition
buttons simultaneously.
2. The first menu displayed when entering
the Utility mode is the MIDI Channel
menu. The Program Display
alternates between Ch and 1 (1 is
the factory default MIDI channel).
3. Use the Program Select knob to
choose the MIDI channel that you want
the MX200 to receive incoming MIDI
Program Change and CC messages on.
The range is 1-16, AL (omni), and OF
(ignores incoming MIDI messages).
4. Press the Store button to save this
change.
Program AutoLoad
From the factory, the MX200 is configured
to have presets loaded manually once they
are selected. This is useful in live applica-
tions when a performance requires differ-
ent programs to be loaded that are not in
adjacent memory locations. Select the pro-
gram using the Program Select knob and
then press the knob to load it for use. The
previous program remains active until the
new program is loaded. If you would like
the programs to be loaded automatically as
they are changed with the Program Select
knob, you can enable the AutoLoad func-
tion.
To enable AutoLoad:
1. Press both the Store and Audition
buttons simultaneously.
2. Press the Audition button repeatedly
until Lo appears in the Program
Display. The Program Display flashes
between Lo and OF, indicating the
AutoLoad feature is disabled.
3. Turn the Program Select knob until the
display reads On to enable AutoLoad.
4. Press the Store button to save this
change.
Analog / Digital Input
Select
The MX200 has both analog and S/PDIF
digital inputs and outputs available. The
S/PDIF digital output is always operational
and any incoming analog signal is
processed and sent to both the analog and
digital outputs. When a digital signal is
received at the S/PDIF digital input from
another device, the MX200 automatically
disables the analog inputs and enables the
digital input to receive signal from the
external device. There are times however,
you may want to leave the digital device
connected but receive signal from the ana-
log inputs.
To enable or disable the digital input:
1. Press both the Store and Audition
23