Use standard tcp/ip properties for dhcp, Gather isp information, Wireless devices and security settings – NETGEAR N600 Wireless Dual Band Router WNDR3400v2 User Manual

Page 17: Types of logins and access, Router setup preparation

Advertising
background image

Getting Started with NETGEAR genie

17

N600 Wireless Dual Band Router WNDR3400v2

Router Setup Preparation

You can set up your router with the NETGEAR genie automatically, or you can use the genie
menus and screens to set up your router manually. However, before you start the setup
process, you need to have your ISP information on hand and make sure the laptops, PCs,
and other devices in the network have the settings described here.

Use Standard TCP/IP Properties for DHCP

If you set up your computer to use a static IP address, you need to change the settings so
that it uses Dynamic Host Configuration Protocol (DHCP).

Gather ISP Information

If you have DSL broadband service, you might need the following information to set up your
router and to check that your Internet configuration is correct. Your Internet service provider
(ISP) should have provided you with all of the information needed to connect to the Internet.
If you cannot locate this information, ask your ISP to provide it. When your Internet
connection is working, you no longer need to launch the ISP login program on your computer
to access the Internet. When you start an Internet application, your router automatically logs
you in.

The ISP configuration information for your DSL account

ISP login name and password

Fixed or static IP address settings (special deployment by ISP; this is rare)

Wireless Devices and Security Settings

Make sure that the wireless device or computer that you are using supports WPA or WPA2
wireless security, which is the wireless security supported by the router. See

Basic Wireless

Settings

on page 27 for information about the router’s preconfigured security settings.

Types of Logins and Access

There are two separate types of logins that have different purposes. It is important that you
understand the difference so that you know which login to use when.

Router login logs you in to the router interface from NETGEAR genie. See

Use

NETGEAR genie after Installation

on page 19 for details about this login.

ISP login logs you in to your Internet service. Your service provider provided you with this

login information in a letter or some other way. If you cannot find this login information,
contact your service provider.

Advertising
This manual is related to the following products: