NETGEAR N600 Wireless Dual Band Router WNDR3400v2 - Manual (Page 55)

USB Storage
55
N600 Wireless Dual Band Router WNDR3400v2
• Network Device Name. The default is readyshare. This is the name used to access the
USB device connected to the router.
• Workgroup. If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here. The name works only in an operating system that supports
NetBIOS, such as Microsoft Windows.
• Access Method. The access methods are described here.
Network Connection. Enabled by default, this connection allows all users on the LAN to
have access to the USB drive.
HTTP. Enabled by default. You can type http://readyshare.routerlogin.net/shares to
access the USB drive.
HTTP (via Internet). Disabled by default. If you enable this setting, remote users can
type http://<public IP address>/shares (for example, http://1.1.10.102/shares) or a
URL domain name to access the USB drive over the Internet. This setting supports file
uploading only.
FTP. Disabled by default.
FTP (via Internet). Disabled by default. If you enable this setting, remote users can
access the USB drive through FTP over the Internet. This setting supports both
downloading and uploading of files.
Available Network Folders
You might need to scroll down to view this section of the screen:
• Share Name. If only 1 device is connected, the default share name is USB_Storage. You
can click the name shown, or you can type it in the address field of your web browser. If
Not Shared is shown, the default share has been deleted, and no other share for the root
folder exists. Click the link to change this setting.