View router status, Router information, Internet provider (wan) setup – NETGEAR N600 Wireless Dual Band Router WNDR3400v2 User Manual
Page 67: Router information internet provider (wan) setup
Administration
67
N600 Wireless Dual Band Router WNDR3400v2
View Router Status
To view router status and usage information, select Advanced Home, or select
Administration > Router Status to display the following screen:
Router Information
Hardware Version. The router model.
Firmware Version. The version of the router firmware. It changes if you upgrade the router
firmware.
GUI Language Version. The localized language of the user interface.
LAN Port.
•
MAC Address. The Media Access Control address is the unique physical address used
by the Ethernet (LAN) port of the router.
•
IP Address. The IP address used by the Ethernet (LAN) port of the router. The default is
192.168.1.1.
•
DHCP Server. Identifies whether the router’s built-in DHCP server is active for the
LAN-attached devices.
Internet Provider (WAN) Setup
MAC Address. The Media Access Control address is the unique physical address used by
the Internet (WAN) port of the router.
IP Address. The IP address used by the Internet (WAN) port of the router. If no address is
shown or the address is 0.0.0, the router cannot connect to the Internet.