Backup settings, Restore configuration settings, Erase – NETGEAR N600 Wireless Dual Band Router WNDR3400v2 User Manual
Page 73
Administration
73
N600 Wireless Dual Band Router WNDR3400v2
Backup Settings
To back up the router’s configuration settings:
1.
Select Advanced > Administration > BackUp Settings to display the following screen:
2.
Click Back Up to save a copy of the current settings.
3.
Choose a location to store the .cfg file that is on a computer on your network.
Restore Configuration Settings
To restore configuration settings that you backed up:
1.
Enter the full path to the file on your network or click the Browse button to find the file.
2.
When you have located the .cfg file, click the Restore button to upload the file to the router.
Upon completion, the router reboots.
WARNING!
Do not interrupt the reboot process.
Erase
Under some circumstances (for example, if you move the router to a different network or if
you have forgotten the password), you might want to erase the configuration and restore the
factory default settings.
You can either use the Restore Factory Settings button on the back of the router (see
on page 110), or you can click the Erase button in this screen.
Erase sets the user name to admin, the password to password, and the LAN IP address to
192.168.1.1, and enables the router’s DHCP.