Garmin Edge 800 - Manual (Page 42)

38 Edge 800 Owner’s Manual
Settings
Changing the Start Notice
This feature automatically detects when
your device has acquired satellites and
is moving. It is a reminder to start the
timer so you can record your ride data.
1. Select MENU > > Bike
Settings > Start Notice > Start
Notice Mode.
2. Select an option:
• Select Once.
• Select Repeat > Repeat Delay
to change the amount of time to
delay the reminder.
System Settings
• GPS Settings ( page 38 )
• Display Settings ( page 39 )
• Map Settings (see Navigation,
page 29 )
• Route Settings (see Navigation,
page 26 )
• Data Recording Settings (see
History, page 20 )
• Unit Settings ( page 40 )
• System Setup ( page 40 )
• Configuration Settings ( page 40 )
• Weight Scale Settings ( page 41 )
gPS Settings
Training Indoors
1. Select MENU > > System >
GPS > GPS Mode.
2. Select Off.
When GPS is off, speed and distance
data are not available unless you have
an optional sensor that sends speed and
distance data to the Edge (such as the
GSC 10). The next time you turn on the
Edge, it will search for satellite signals
again.