Training, Going for a ride, Saving your ride data – Garmin Edge 800 User Manual
Page 8: Alerts
4
Edge 800 Owner’s Manual
Training
Training
going for a ride
Before you can record history, you
must locate satellite signals or pair
your Edge with an ANT+
™
sensor
(
).
1. From the timer page, press START
to start the timer.
History is recorded only while the
timer is running.
2. After completing your ride, press
STOP.
Saving Your ride Data
Press and hold RESET to save
your ride data and reset the timer.
Alerts
You can use Edge alerts to train toward
specific time, distance, calorie, heart
rate, cadence, and power goals.
Using Time, Distance, and
Calorie Alerts
1. Select MENU > Training > Alerts.
2. Select Time Alert, Distance Alert,
or Calorie Alert.
3. Turn on the alert.
4. Enter a time, distance, or calorie
amount.
5. Go for a ride.
Each time you reach the alert amount,
the Edge beeps and displays a message.
NOTE: To turn on audible tones for
messages, see
.