Universal setup menu – Lexmark E260dn User Manual

Page 74

Advertising
background image

Universal Setup menu

These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal
Paper Size is a user-defined paper size. It is listed with the other paper size settings and includes similar options, such
as support for duplex printing and printing multiple pages on one sheet.

Menu item

Description

Units of Measure

Inches
Millimeters

Identifies the units of measure

Notes:

Inches is the US factory default setting.

Millimeters is the international factory default setting.

Portrait Width

3–14.17 inches
76–360 mm

Sets the portrait width

Notes:

If the width exceeds the maximum, then the printer uses the maximum
width allowed.

8.5 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.

216 mm is the international factory default setting. Millimeters can be
increased in 1-mm increments.

Portrait Height

3–14.17 inches
76–360 mm

Sets the portrait height

Notes:

If the height exceeds the maximum, then the printer uses the
maximum height allowed.

14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.

356 mm is the international factory default setting. Millimeters can be
increased in 1-mm increments.

Feed Direction

Short Edge
Long Edge

Specifies the feed direction

Notes:

Short Edge is the factory default setting.

Long Edge appears only if the longest edge is shorter than the
maximum length supported in the tray.

Understanding printer menus

74

Advertising
This manual is related to the following products: