Bowflex Xtreme 2 User Manual

Page 5

Advertising
background image

3

Item #: M
Qty.: 3
Descr: 1/4" Flat

Washer

Item #: O
Qty.: 31
Descr: 3/8" Flat

Washer

Item #: N
Qty.: 6
Descr: 5/16" Flat

Washer

Item #: T
Qty.: 4
Descr: Cable End

Stop Ball

Item #: P
Qty.: 4
Descr: 1/2" Flat

Washer

Item #: R
Qty.: 3
Descr: 3/8" Nylock

Nut

Basic Assembly Principles

Here are a few basic tips that will make assembly quick and easy and simplify each process, saving yourself extra time and effort.
1. To make the assembly process go faster, gather the pieces you need for each step and thoroughly read the assembly

instructions for that step prior to starting assembly for the step.

2. When tightening a locknut on a bolt, use a combination wrench to grip the locknut and ensure that it is fastened securely.
3. When attaching two pieces, gently lift and look through the bolt holes to help guide the bolt through the holes.
4. As a general rule, and for all bolts and nuts on your Bowflex

®

Xtreme

®

2 home gym, turn bolts or nuts toward the right to

tighten and left to loosen. Or you can remember the mnemonic: “Righty tighty, lefty loosey.”

5. It is recommended that you use two people to assemble your Bowflex

®

Xtreme

®

2 home gym.

Tools You Will Need

You will need the following tools to complete the assembly of your Bowflex

®

Xtreme

®

2 home gym. If you don’t have these tools,

you can find them at any hardware or department store for a reasonable price.

• 1/2" combination wrench
• 9/16" combination wrench
• 3/4" combination wrench

Unpacking Your Bowflex

Leave all Cables wrapped and bagged until your Bowflex

®

Xtreme

®

2 home gym is fully assembled.

Select where you are going to put your Bowflex

®

Xtreme

®

2 home gym carefully.

The best place for your Bowflex

®

Xtreme

®

2 home gym is on a hard, level surface. Assemble your Bowflex

®

Xtreme

®

2 home gym

in the location where you intend to use it, as it does not go through doors easily once fully assembled.

• An adjustable wrench
• Phillips screw driver
• Flat blade screw driver

• Rubber mallet (optional)
• Utility Knife or Scissors
• 3/16" Allen Wrench (included)

Item #: L
Qty.: 4
Descr: M4 Flat

Washer

Item #: S
Qty.: 6
Descr: 1/2" Nylock

Nut

Note: Drawings are actual size

Item #: Q
Qty.: 4
Descr: 1/2" Flat Washer,

large O.D.

Advertising