Bowflex Xtreme 2 User Manual

Page 8

Advertising
background image

Step 5: Install the Right and Left Squat Frame Rails

Locate the following items:

Item #8 - Right Squat Frame Rail

Item #9 - Left Squat Frame Rail

Item #10 - Right Squat Frame Foot Assembly

Item #11 - Left Squat Frame Foot Assembly

Item #34 - 6 Squat Pulley (Squat/Arm Right Cable)

Item #35 - 6 Squat Pulley (Squat/Arm Left Cable)

• From Step 4 - Main Assembly

Item #F - (4) 3/8" X 3/4" Hex Head Bolts

Item #G - (2) 3/8" X 1" Hex Head Bolts

Item #I - (1) 3/8" X 5" Hex Head Bolt

Item #O - (8) 3/8" Washers

Item #R - (1) 3/8" Nylock Nut

Do not unwrap cables.

Before you install the Squat Frame Rails, slide the 6 Squat

Pulley (Item #34) over the end of the Right Squat Frame

Rail (Item #8), and the 6 Squat Pulley (Item #35) over the

end of the Left Squat Frame Rail (Item #9), see Figure 5.
Line up the holes in the brackets on the Right Squat

Frame Rail (Item #8) and Left Squat Frame Rail (Item #9)

with the holes in the Seat Support Rail (Item #7) as shown

in Figure 5.
Place (1) 3/8" Washer (Item #O) over the end of (1) 3/8" X

5" Hex Head Bolt (Item #I), and slide the bolt through the

upper bolt hole in the Left Squat Frame Rail, Seat Rail and

Right Squat Frame Rail, as shown in Figure 5. Place (1)

3/8" Washer (Item #O) and (1) 3/8" Nylock Nut (Item #R)

over the end of the bolt to secure it.
Then, place (2) 3/8" Washers (Item #O) over the ends of

(2) 3/8" X 3/4" Hex Head Bolts (Item #G) and attach the

Squat Frame Rails more securely by screwing these through

the lower holes in the Squat Frame Rails and Seat Rail, as

shown in Figure 5.
Next, (see Figure 5a) slide the Right Squat Frame Foot

Assembly (Item #10) into the connectors on the Right

Frame Rail (Item #2) and the Right Squat Frame Rail.

Secure the Foot Assembly using (2) 3/8" X 3/4" Hex Head

Bolts (Item #F) and (2) 3/8" Washers (Item #O).
Repeat this process for the Left Squat Frame Foot Assembly

(Item #11).
Note: You will need to lift the machine to install the Squat

Frame Foot Assemblies.

Tighten all hardware from Step 5 only at this time.

Figure 5

I

R

8

9

7

G

O

Figure 5a

8

9

11

10

35

6

34

2

F

O

Advertising