Assembly guide, Step 3, Install lower lat tower assembly – Bowflex Xtreme User Manual
Page 7: Step 4 install seat support rail, Parts, Hardware, Tool, Do not tighten screws at this time
5
Assembly Guide
Step 3
Install Lower Lat Tower Assembly
Parts:
• Lower Lat Tower Assembly
• Base Frame Assembly
Hardware:
• 2 Button Head Screws (3/8" X 3/4")
• 2 Flat Washers (3/8")
Tool:
7/32” Hex Wrench
3-1
Align the Lower Lat Tower Assembly over
the Base Frame. Push the bottom of the Lower
Lat Tower onto the connector of the Rear Cross
Member as shown.
3-2
Secure Lower Lat Tower Assembly
using screws and washers as shown.
Do not tighten screws at this time.
Step 4 Install Seat Support Rail
Parts:
• Seat Support Rail
• Base Frame Assembly
Hardware:
• 2 Button Head Screws (3/8" X 3/4")
• 2 Flat Washers (3/8")
Tool:
7/32" Hex Wrench
4-1
Slide the bottom of the Seat Support
Rail onto the Base Frame connector
as shown.
4-2
Slide the top of the Seat Support
Rail onto the Lower Lat Tower
Assembly connector as shown.
Secure using screws and washers
as shown.
Do not tighten screws at this time.
Base Frame
Assembly
Button
Head
Screw
Flat
Washer
Button
Head
Screw
Flat
Washer
Base Frame/
Lower Lat Tower
Assembly
Seat Support Rail
Flat
Washer
Button
Head
Screw
Button
Head
Screw
Flat
Washer
Lower Lat Tower
Assembly