Connecting a master valve – Hunter X-CORE User Manual

Page 11

Advertising
background image

9

CoNNECTING a masTEr ValVE

NoTE: Complete this section only if you have a
master valve installed in your irrigation system. A
master valve is a “normally closed” valve installed
at the supply point of the main line that opens only
when the controller initiates a watering program.

1. At the Master Valve, attach the common wire to either solenoid

wire of the valve. Attach a separate control wire to the remaining

solenoid wire.

2. The common wire should be attached to the C terminal inside

the controller. The other wire coming from the master valve

should be attached to the P terminal inside the controller.

Tighten each terminal screw.

SEN

C P 1 2 3 4 5 6 7 8

24VAC

BAT

master Valve

Valve 2

Valve 1

Valve 3

Valve 4

master

Valve Wire

Valve Common Wire

Valve Wires

Advertising