Line 6 M9 User Manual
Page 4
R
eaR
C
onneCtions
1. Cable Retainer -
Wrap your power supply cable around this once or
twice to prevent an accidental disconnect.
2. Power -
Connect your Line 6 Power Supply here to power the unit.
3. MIDI In/Out -
Please see
www.line6.com/manuals
for the skinny on
MIDI features, which allow you to remote control scene changes, FX
unit memory selection, looper operation, expression pedals, and tap
tempo. Plus dump and receive scene data via MIDI System Exclusive
messages.
4. Expression Pedal 1 + 2 -
Compatible with standard expression pedals,
including the Line6 EX-1. Control FX parameters in real time by
assigning them to either of these expression pedal inputs. The Line6
expression pedal is a passive 10K ohm mono linear taper pot, using a
standard 1/4 inch mono instrument cable.
5. Stereo Input -
When connecting your guitar or other mono source use
the
L(MONO)
input.
6. Stereo Output -
For mono output, use the
L(MONO)
output.
B
asiC
o
peRation
CT
Growler
MIX
FILTER
0.84HZ
1A
FREQ
PITCH
Q
1. FX (1,2,3) Units -
You can run up to 3 effects at once. Each FX Unit has
2 memories (
A & B
), which can run any model of any type (Distortion–
yellow, Delay–green, Modulation–blue, Filter–purple & Reverb–
orange.
2. Memory Footswitches -
All FX Units have 2 memories (
A & B
). Only
one memory can be active at a time: its footswitch will be brightly lit,
and colored to show the effect type. Inactive switches are dimly lit. Step
on a footswitch to activate that memory. Step on an active memory
switch to bypass the FX Unit.
3. Display -
Your display will show all the settings for the most recently
selected FX Unit memory (shown in upper left corner of the display).
The display illuminates the color of current effect type (Distortion–
yellow, Delay–green, Modulation–blue, Filter–purple & Reverb–orange).
When a currently displayed FX Unit is turned off the display will show
the first active FX Unit in your signal chain. If no FX Units are on the
display will read “
All FX Bypassed
”. To edit an active FX Unit that