Cisco WRTP54G User Manual
Page 22
Wireless-G Broadband Router with 2 Phone Ports
14
Chapter 5: Configuring the Router
Overview
Setup
•
Basic Setup. Enter the Internet connection and network settings on this screen.
•
DDNS. Enable the Router’s Dynamic Domain Name System (DDNS) feature on this screen.
•
MAC Address Clone. If you need to clone a MAC address onto the Router, use this screen.
•
Advanced Routing. On this screen, you can alter firewall, Network Address Translation (NAT), Dynamic
Routing, and Static Routing configurations.
Wireless
•
Basic Wireless Settings. Enter the basic settings for your wireless network on this screen.
•
Wireless Security. Enable and configure the security settings for your wireless network.
•
Wireless MAC Filter. To permit or deny wireless network access for specific devices, set up MAC address
filtering.
•
Advanced Wireless Settings. Advanced users can alter data transmission settings on this screen.
Security
•
Firewall. To enable certain types of web filters, use this screen.