Cortelco 2740 User Manual
Page 26
21
2740 User Manual Version 1.11
b.
When the intercom party answers announce that a call is being transferred.
c.
Press the TRANSFER button to complete the transfer. Press the LINE button to return to
the outside call and abort the transfer.
5.5.2
Blind Transfer
a.
Press the TRANSFER button.
b.
Dial the desired two-digit station number to transfer the call to that station. If the desired
station does not answer, it will stop ringing after one minute.
To re-engage the call press the flashing LINE button. The call can be answered at any telephone by
pressing the flashing LINE button.
5.5.3
Transfer Ring
A call may be transferred to all stations by using the transfer ring. To use this feature, press
TRANSFER twice after answering a call. All of the other phones will ring in the transfer ring and the
call will be transferred to the next answering station. The call will remain on hold at the transferring
station until it is retrieved at another.
5.5.4
Personal Ring
The 2740 telephone also features eight unique personal transfer rings. These may be assigned to
individual users. Calls can then be transferred to them using this ring. To use this feature, press
TRANSFER and then the desired dial pad number buttons. All the other phones will now ring with the
personal ring represented by that number.
5.6
Caller ID
The Caller ID feature works in conjunction with Caller ID service offered by your local telephone
company. The 2740 will store the last 50 calls received. This feature requires a subscription to Caller
ID service from the telephone company. This service must be ordered separately for each line. Also
note that call waiting caller ID may not be available in all areas.
5.6.1
Incoming call
The caller ID information will be displayed automatically.
5.6.2
Call Waiting Caller ID
If a call comes in during an active call, the display will show the caller ID information. To answer that
call, press FLASH. To return to the previous call, press FLASH again.
5.6.3
Caller List
5.6.3.1
Reviewing Calls
To review previous calls, press the CALLS button and use the up and down arrow buttons under the
display to scroll through the caller list. The display will indicate the number of new calls in the caller
list, as well as the total number of calls in the caller list. A “new” call is one that has not yet been
viewed.