Operation, The defiant controls, Defiant woodburning stove – Vermont Casting 1945 User Manual
Page 18: Install the optional ash door heat shield, Adjust the leg levellers, Everse the flue collar (if necessary), Attach the damper handle, Attach the primary air thermostat handle, Assemble the removable insert handle
 
18
Defiant Woodburning Stove
30001693
Install the Optional Ash Door Heat Shield
1. Remove the two Phillips pan head screws from the
ash door.
2. Insert the screws through the ash door heat shield
(from the painted side), place the 5/16” spacers over 
the screws, and carefully thread them back into the 
original holes. (Fig. 24) The curved lip should be 
upward, under the ashlip of the stove.
3. Tighten securely.
ST540
Assembly
handle
11/00
ST540
Fig. 26 Assemble the front door handle.
ST539
Attach
ash door
heat shield
11/00
ST538
Spacers
Fig. 24 Install the ashdoor heat shield.
DEFIANT
ST539
attach
thermostat
handle
11/00
ST539
Fig. 25 Attach the thermostat handle.
Adjust the Leg Levellers
Lift the stove slightly so there is no weight on the leg 
while making the adjustment.
R
everse the Flue Collar (If Necessary)
Reverse the flue collar by removing the two screws that 
attach it to the back of the stove. Be sure the gasket 
around the flue collar opening is in position when you 
screw the collar back onto the stove.
Attach the Damper Handle
Use the 1/4” -20 x 3” screw to attach the damper 
handle to the damper stub on the left side. 
Attach the Primary Air Thermostat Handle
The primary air thermostat handle is the smaller of the 
two black handles. Secure the handle to the stub on 
the right side of the stove with an 8-32 x 2” slot head 
machine screw. (Fig. 25) 
Assemble the Removable Insert Handle
The ceramic removable insert handle opens and closes 
the front doors. Remove after each use, and store it in 
the handle holder behind the right front leg. Assemble 
the handle by passing the 3³⁄₈" screw through the 
ceramic shaft and into the bright metal nub. (Fig. 26) 
Tighten carefully until snug. 
The Defiant Controls
Two controls regulate the performance of the Defiant: a 
primary air control supplies oxygen for the fire, and a 
damper directs air flow within the stove to activate and 
deactivate the catalytic combustor. (Fig. 27)
Symbols cast into the stove are reminders of the cor-
rect directions for using the controls. ‘Left’ and ‘right’ in 
these directions mean as you face the stove.
Operation
ST541
Defiant
front view
controls
11/00
Griddle Handle
Door Handle
Air
Control
Lever
Ash Door Handle
ST541
Door Handle
Holder
(Behind
Leg)
Andiron
Damper
Handle
Fig. 27 The Defiant’s controls are conveniently located and 
easy to operate.