Important note, Special function f3: defrosting ft toasting – AEG MCC 3881 E-M EN User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Special Functions

The following table shows the Special Function F2 programmes, indicating weight intervals, and

defrosting and standing times (in order to ensure the food is of a uniform temperature).

Programm

b 01

Food

Weight (kg) Time (Min.)

Potatoes

200

-

1000

4-17

Turn 1 - 2 X keep covered

b 02

Vegetables 200-1000

4-15

Turn 1 - 2 X keep covered

b 03

Rice

200 - 500

13-20

One part rice, two parts water,

__________keep covered_________

b 04

Fish

200

-

1000

4-13

Keep covered

Important Note:

• Always use dishes for use in the microwave oven and a lid or cover to avoid loss of

liquids.

• Stir or mix the foods several times during heating, especially when the oven emits a

beep and the display is flashing as follows ^^‘-"'”1

Warning!

After heating, the container may be very hot. Although microwaves do not heat up

most containers, these may heat up through heat transmission from food.

Preparation instructions:

• Fish pieces

- Add 1 to 3 soup spoons of water or lemon juice.

• Rice

-Add water equivalent to twice or three times the quantity of rice.

• Unpeeled potatoes

- Use potatoes of the same size. Wash them and prick the skin

several times. Do not add water.

• Peeled potatoes

and

Fresh vegetables

- Cut into pieces of the same size. Add a soup

spoon of water for every 100 g of vegetables, and salt to taste.

Special Function F3: Defrosting Ft Toasting

Use this function

to cook and toast various types of food.

• Select the Special function F3 with the Function selection keys

I

• Select the Program with Parameter selection keys B. The Duration and Clock symbols

and the display start blinking.

• Set the program with the Plus and Minus keysB (refer to the table below).

• Press the Confirmation key B to validate the program. The display and symbols stop

blinking.

• Select the Weight with Parameter selection keys B. The Weight symbol and display

start blinking.

23

Advertising
This manual is related to the following products: