Installation instructions, Before installation – AEG MCC 3881 E-M EN User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation instructions
INSTALLATION INSTRUCTIONS
A,
'Before installation
Check that the input voltage
indicated on the characteristics plate is the same as the voltage
of the power outlet you are going to use.
Open the oven door and
take out all the accessories
and remove the packing material.
Do not remove the mica cover
on the ceiling of the interior! This cover stops fat and pieces of
food damaging the microwave generator.
Warning!
The front surface of the oven may be wrapped with a
protective film.
Before using
the oven for the first time, carefully remove this film, starting on the inside.
Make sure that the oven is not damaged in any way.
Check that the oven door closes
correctly and that the interior of the door and the front of the oven opening are not damaged.
If you find any damage contact the Teehnieal Assistanee Serviee.
DO NOT USE TEIE OVEN
if the power cable or the plug are damaged, if the oven does not
function correctly or if it has been damaged or dropped. Contact the Technical Assistance
Service.
Put the oven on a flat and stable surfaee. The oven must not be put elose to any sourees of heat,
radios or televisions.
During installation, make sure that the power cable does not come into contact with any
moisture or objects with sharp edges behind the oven. High temperatures can damage the cable.