Presehing stations, 1 select a band and station, 2 press the ii set button to store the station – Aiwa CX-N4000 U User Manual
Page 44: 3 repeat steps 1 to 2 for the next station, Presetting stations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RADIO RECEPTION
PRESEHING STATIONS
SET
Cl :/ n n
J J • U U
h t 1 ' ! &
The unit can store a total of 32 preset stations. When you store a
station, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly. (See page 46.)
1 Select a band and station.
See “MANUAL TUNING” on page 42.
2 Press the II SET button to store the station.
DISPLAY
@ The frequency
(D The preset number flashes twice.
@ The preset numbers
The selected preset number flashes.
Note that only the first 20 numbers are displayed, even if the
21 to 32 stations are stored.
NOTE
To change the preset stations, follow the procedure ‘To clear a
preset station” on page 46, and store new stations again.
3 Repeat steps 1 to 2 for the next station.
44