Sehing the sleep timer, 1 press the sleep button, Setting the sleep timer – Aiwa CX-N4000 U User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
.
' ?
SEHING THE SLEEP TIMER
The sleep timer automatically turns the unit off after the specified
time passes.
koBoo,
l-J
1 Press the SLEEP button.
SLEEP ©, (D and 60 (3) are displayed.
SLEEP @ goes out in 4 seconds, and the sleep timer starts to
work. The power is automatically turned off after 60 minutes.
If you wish to change this time, go to step 2 before SLEEP ©
goes out.
2 Press the DOWN or ►► UP button to specify
the time until the power is turned off.
Each time the button is pressed, the time changes between 10
and 240 minutes in 10-minute steps.
The specified time © is displayed.
To check the time remaining untii the power is turned off
Press the SLEEP button once. The remaining time is displayed for
4 seconds.
To cancei the sleep timer mode
Press the SLEEP button twice so that SLEEP in the display goes
out.
66