Bolens 140-830A User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To take off the drag link, remove the nuts and lock
washers holding the ball joint to the steering gear
and left front axle bracket.
Brake Adjustment
A
CAUTION
Do not adjust the brake while the
engine is running. Be sure to block
the wheels of the tractor before
making the brake adjustment.
Drag Link
¡.Lock Nut
, Ball Joint
^
Hex Nut
a
FIGURE 19.
1. Loosen the lock nut. (See figure 20.)
2. Tighten the center bolt all the way in.
3. Unscrew the center bolt one complete turn.
4. Test the brakes and repeat step three if
necessary.
FIGURE 20.
Changing the Front Drive Belt
1. Remove the cutting deck and battery.
2. Raise and block the front wheels of the tractor
so you can work under it.
3. Unscrew the belt guard release next to the
engine pulley. (See figure 21.)
5. Tighten the lock nut.
FIGURE 21.
14