Attaching the chute deflector (hardware e), Warning i, Controls – Bolens TMO-33920A User Manual
Page 12: Throttle control, Light switch (optional), Choke (optional), Gear shift lever
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ATTACHING THE CHUTE DEFLECTOR
(Hardware E)
áki
WARNING i
Do not operate your unit unless the
chute
deflector
has
been
properly
installed.
Place the chute deflector in position on the deck.
Secure with truss machine screws, lock washers and
-hex nuts. See figure 16.
FIGURE 16.
CONTROLS
THROTTLE CONTROL
The throttle control is used to regulate the engine
speed. To get maximum efficiency from cutting, the
throttle should be in the FAST position when operating
the mower. See figure 17.
Clutch-Brake
Pedal
Throttle
Control
;
Ammeter
(Optional)
/
Gear Shift
Lever
Ammeter
Throttle
Clutch-Brake
Pedal
Light
Switch j
Ignition
Switch
Lift and
Disengagement
Lever
Ignition
Switch
Light Switch
(Optional)
Choke
(Optional)
Gear Shift
Lever
FIGURE 17A.—Model TMO-33920A
FIGURE 17B.—Model TMO-33921A
CHOKE CONTROL
The choke control is located on the dashboard and is
operated manually. Details for the choke operation are
covered in the separate engine manual packed with
your unit. See figure 17.
GEAR SHIFT LEVER
The shift lever is located on the left side of the console
and has three positions, FORWARD, NEUTRAL and
REVERSE. See figure 17. The clutch-brake pedal must
be depressed and the lawn tractor must not be mov
ing when shifting gears. Do not force the shift lever.
12