Aiwa NSX-A888 - Manual (Page 11)

Depending on sound sources (such as, songs whose tempo
is varying), however, you may see different tempos appearing
one after the other in the display.
After once synced up if the sync lock unlocks the display will
read “BEAT OUT,” and again the unit will try to get synced up.
At the occurrence of BEAT OUT the level of the rhythm is
automatically reduced to “1 and it increases back to the preset
level when sync is achieved again.
USING THE SPICE FUNCTION
SPICE A/B function Q
The SPICE A/B function allows you to add percussion to the z
playback of the music and create your original sounds. 3
Your sounds created with SPICE A/B can be recorded on tape if ^
you want to.
To select sounds
■
The BEAT function can be used together with the SPICE A/B
function, as well as with the FILL IN function. (For these functions
see below.) But you cannot use the AUTO SPICE function at the
same time as the BEAT function.
Using the FILL IN function
The FILL IN function is used together with the BEAT function to
insert a variation of the current rhythm pattern.
The AUTO SPICE/FILL IN double function switch takes on the
FILL IN function when the BEAT function is switched On.
3
2
• The AUTO SPICE function is not available at the same time as
the FILL IN function.
• The FILL IN function is not available when making a tape copy
between two tape decks using SYNC DUB.
To use the FILL IN function
BEAT
ON/OFF
-FILL IN
1 Press A.
You’ll hear the current sound stored in A.
2 Within 4 seconds, turn MULTI JOG to the left or
right until you find the desired sound.
As the display changes, you’ll hear the respective sound.
3 In a similar way, select a sound for B.
To actually use the function
Once you are satisfied with the sound selection, let the music
start playing, and hit
SPICE A or B in time with the music as if to
play percussion instruments.
You cannot use the SPICE A/B function when making a tape
copy between two tape decks using
SYNC DUB.
During playback with the BEAT function switched on, press FILL
IN at the desired moment.
^ FILL IvV
The display will read “FILL IN” and, when the current cycle of the
rhythm pattern is over, you’ll hear a short sound different from
the rhythm pattern. This sound depends on rhythm patterns. If
you want, try to change the rhythm pattern. (Selecting a rhythm
pattern is discussed earlier, under the corresponding heading.)
ENGLISH
1 1