Aiwa NSX-A888 - Manual (Page 16)

TAPE PLAYBACK
To select a reverse mode (deck 2 only)
Each time REV MODE (DECK 2) is pressed, the reverse mode
changes.
TP2 0000
-APUSH EJECT
-Deck 2
To piay one side only, seiect H.
To piay from front side to reverse side once oniy, seiect D.
To piay both sides repeatediy, seiect
CL').
• When tapes are ioaded in both decks, Z.) on the dispiay
indicates Continuous Piay.
To select a playing deck
When tapes are ioaded in both decks, press TAPE/DECK 1/2
first to seiect a deck.
The seiected deck number is displayed.
• On deck 1, tapes are aiways piayed back on both sides.
On deck 2, you can seiect a reverse mode to piay back one or
both sides.
• Use Type I (normai). Type II (high/Cr02) or Type IV (metai)
tapes for piayback.
1 Press TAPE/DECK 1/2 and press £ PUSH EJECT
to open the cassette holder.
insert a tape with the exposed side down. Push the cassette
hoider to close.
2 Press to start play.
The tape counter indicates the
Piaying deck number tape running iength.
TPl 0000^
Piayback side indicator
The front side is being piayed (forward).
I: The baok side is being piayed (reverse).
To stop play, press ■.
To pause play (deck 2 only), press II. To resume piay, press
again.
To change the playback side, press ◄ ► in piay or pause mode.
To fast forward or rewind, press ◄◄ or ►►.Then press ■ to
stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE/DECK 1/2. The power is turned on and piay of the
inserted tape begins.
To set the tape counter to 0000
Press ■ CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened and closed.
1 6
ENGLISH