Aiwa NSX-999 - Manual (Page 2)

FOREWORD
Welcome to the Aiwa NSX-999
Congratulations on your purchase of an Aiwa Stereo System.
To optimize the performance of this system, please take the time
to read through these Operating Instructions and become fdmiliar
with the operating procedures.
About the layout of this manual
This manual contains instructions in three languages ((g) English,
(3) Spanish, (3) French) and illustrations ® -♦ □ . When following
the steps for each operation, refer to the illustration indicated by the
capital letters (El )■ Boldface numbers refer to steps in the opera­
tion. Smaller numbers and lowercase letters in circles (®) are used
to explain step procedures and identify parts and controls.
DEMO (Demonstration) mode
(See also page 16 for detail.)
When you first connect the AC cord, the display window demon­
strates the unit’s preset functions.
To cancel DEMO mode
Press the DEMO button.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
“CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED ,
SERVICE PERSONNEL.”
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dan­
gerous voltage” within the product’s enclosure
that may be of sufficient magnitude to consti­
tute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte­
nance (servicing) instructions in the literature
accompanying the appliance.
NOTE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruc­
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be deter­
mined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and re­
ceiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
CAUTION
Modifications or adjustments to this product, which are not ex­
pressly approved by the manufacturer, may void the user’s right or
authority to operate this product.