Cleaning & lubrication, Storage, Important – Black & Decker 9013 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
X
■
Cleaning & Lubrication
Use only mild soap and a damp
cloth to clean the tool. Never let any
liquid get inside the tool; never immerse
any part of the tool into a liquid.
Self lubricating bearings are used
In the tool and periodic lubrication is not
required. In the unlikely event that your
drill should ever require service, take or
send it to your local Black & Decker
Service Center or Authorized Service
Station. Service Center addresses are
listed on the owner's registration card
packed with your drill.
Storage
1. The best storage place is one that is
cool and dry - away from direct
sunlight, heating pipes and ducts,
furnaces, etc.
2. Best storage temperature is approxi
mately +50°F. Do not store where
temperatures may go below +40°F
or above +120°F. Avoid storage in
outside metal buildings where the
temperature could go above +120°F
in summer, as this could damage
the drill.
3. Long storage will not harm the drill
or charger. Under the proper
conditions (given above) they can
be stored for 5 years or more
without harm.
Important
To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment should be performed by
Black & Decker Service Centers or other
qualified organizations, always using
Black & Decker replacement parts.
1 0