Black & Decker 9013 - Manual (Page 11)

rx
Accessories
The accessories listed in this
manual are available at extra cost from
your local Dealer or Black & Decker
Service Center. A complete listing of
service centers is included on the
owner's registration card packed with
your tool. If you need assistance in
locating any accessory, please contact:
Black & Decker (U.S.) Inc., Consumer
Service Dept., 626 Hanover Pike, P.O.
Box 618, Hampstead, MD 21074-0618.
Recommended accessories for your
tool are shown in this manual. The use of
any other accessory or attachment might
be hazardous.
We strongly recommend that you
first purchase the No. 72-000 Safety
Glasses which should be worn when
using all power tools.
For safety in use, the following
accessories should be used only in the
sizes specified below:
BITS, METAL DRILLING-Up to 3/8".
BITS, MASONRY DRILLING-Up to 3/8".
BITS, WOOD DRILLING-Up to 3/8".
Holster
This holster fastens to your belt and
keeps the tool handy and ready for work.
It also frees both hands when you are
not actually using the tool.
Never holster your drill with a bit in
the chuck.
1 1