Ask Proxima DP5600 - Manual (Page 18)

c
OPERATION OF CONTROLS
TOP OF THE
TOP
CONTROL
O
o
e
o
o
©
o
©
©
POWER INDICATORS
Light is dim when the projector is on.
Light is brightened when the projector is in stand-by mode.
READY INDICATORS
Light is green when projector lamp is ready to be turned on.
TEMPERATURE WARNING INDICATOR
Flashes red when internal projector temperature is
too high.
LAMP REPLACEMENT INDICATOR
Light is orange when projection lamp
is nearing end of service life.
POWER (LAMP) ON/OFF BUTTON
Used to turn projection lamp on or off.
MODE BUTTON
Used to select video source.
(Computer Input or VIDEO Input)
VOLUME BUTTONS
Used to adjust volume.
SYSTEM BUTTON
• Computer Mode
Used to select computer system.
• VIDEO Mode
Used to select color system.
SETTING BUTTON
Used to set the auto retract, reverse scan T/B,
reverse scan L/R. blueback and display.
MENU BUTTON
• Computer Mode
Used to adjust picture image.
(brightness, contrast, horizontal position, vertical
position and fine sync.)
• VIDEO Mode
Used to adjust picture image.
(color, tint, contrast, brightness and sharpness.)
©
0
0
LEVEL CONTROL BUTTONS
# Computer Mode
Used to adjust zoom, focus, brightness, contrast,
horizontal position, vertical position, fine sync and setting
the auto retract, reverse scan T/B, reverse scan L/R,
blueback and display by pressing + or - button.
• VIDEO Mode
Used to adjust zoom, focus, color, tint, contrast,
brightness, sharpness and setting the auto retract,
reverse scan T/B, reverse scan L/R, blueback and
display by pressing + or - button.
ZOOM/FOCUS BUTTON
Used to select power zoom lens or focus adjust.
NORMAL BUTTON
Used to reset to normal picture adjustment preset by
factory.
— 1 8
—