Ask Proxima DP5600 - Manual (Page 36)

You can adjust these settings except PC ADJUSTMENT by using either the REMOTE CONTROL UNIT or the TOP
CONTROL of the projector.
USING THE REMOTE CONTROL TRANSMITTER UNIT
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Move the arrow by pressing the POINT BUTTON (UP/DOWN) to select SETTING. Press the REAR CLICK
BUTTON. Another dialog box, SETTING DISPLAY, will appear.
3. Move the arrow to an item you want to switch and the current setting is displayed at the bottom right of the screen.
4. If you want to flip the setting, press the REAR CLICK BUTTON.
5. To quit the MENU, point to QUIT and then press the REAR CLICK BUTTON.
6. The settings are permanently held even if the MAIN ON/OFF is switched off.
MAIN MENU DISPLAY SETTING DISPLAY
SYSTEM
IMAGE
SCREEN
SETTING
LANGUAGE
►
►
►
►
►
QUIT
AUTO RETRACT
REVERSE SCAN T/B
REVERSE SCAN L/R
BLUEBACK
DISPLAY
QUIT
PC ADJUSTMENT
CASE OF
AUTO RETRACT
USING THE TOP CONTROL OF THE PROJECTOR
1. Press the SETTING BUTTON and the SETTING DISPLAY will
appear.
2. Move the arrow to an item you want to switch by pressing the
SETTING BUTTON. The arrow will cyclically move downwards
one by one each time the SETTING BUTTON is pressed.
3. The current setting for the selected item is displayed at the
bottom right of the screen.
4. The items and the alternatives that you can set are summarized
in the table below.
5. To switch the setting, press the LEVEL (+) or (-) BUTTON.
6. To quit the MENU, point to QUIT by pressing the SETTING
BUTTON and then press the LEVEL (+) BUTTON.
NOTE: The adjustments have been preset at the factory to the left
column values (LEVEL + side) on this table.
FUNCTION LEVEL (+) LEVEL(- )
AUTO RETRACT ON OFF
REVERSE SCAN T/B TOP BOTTOM
REVERSE SCAN 17R LEFT RIGHT
BLUEBACK ON OFF
DISPLAY ON OFF
SETTING DISPLAY
AUTO RETRACT
REVERSE SCAN T/B
REVERSE SCAN L/R
BLUEBACK
DISPLAY
QUIT
PC ADJUSTMENT
—
36
-