Ask Proxima DP5600 - Manual (Page 30)

This projector has an expanding function, which enables you to project the VGA image in the full screen size.
Expanding function
Although this projector can project a VGA (640 x 480) image without any setting, the image projected is relatively
small compared to a SVGA (800 x 600) image. To avoid this, this projector provides the expanding function to see
the full sized VGA image. You can choose either "FINE”, where the normal VGA image is projected or "EXPAND”,
where the full-sized VGA image is projected.
This adjustment is available only with the REMOTE CONTROL UNIT.
1. Press the MODE BUTTON to set COMPUTER MODE.
2. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
3. Move the arrow by pressing the POINT BUTTON (UP/DOWN) to select SCREEN. Press the REAR CLICK
BUTTON. Another dialog box, SCREEN ADJUST DISPLAY, will appear.
4. To switch to "EXPAND MODE”, move the arrow to EXPAND by pressing the POINT BUTTON (UP/DOWN) and
then press the REAR CLICK BUTTON.
5. To switch to "FINE MODE”, move the arrow to FINE by pressing the POINT BUTTON (UP/DOWN) and then press
the REAR CLICK BUTTON.
6. The "EXPAND” setting is temporarily effective until you turn off the MAIN ON/OFF switch.
7. To quit the MENU, move the arrow to QUIT and then press the REAR CLICK BUTTON.
( PICTURE SCREEN ADJUSTMENT (COMPUTER MODE)
MAIN MENU DISPLAY
SYSTEM
IMAGE
SCREEN
SETTING
LANGUAGE
►
►
►
►
►
QUIT
SCREEN ADJUST
DISPLAY
FINE MODE EXPAND MODE
o ^ 1 o
CO (M ■ o
(O ■ CO
cvj
<o
832
800
832
—
30
—