Cortelco 2750 User Manual
Page 28
23
c.
Press the soft key under ENTER. “Ans System: OFF” will appear in the display.
d.
Press the soft key under CHANGE “Ans System: ON” will appear in display.
e.
Press MENU to exit
The LCD display will show a handset in the upper left corner to indicate that the Answering Machine is
turned on.
5.1.2
Record your OGM
a.
Press MENU
b.
Press DOWN ARROW repeatedly until “Answer Setting” appears in the display.
c.
Press the soft key under ENTER. “Ans System: ON” will appear in the display.
d.
Press DOWN ARROW repeatedly until “OGM Setup” appears in display.
e.
Press the soft key under ENTER. “Ans OGM” will appear in display.
f.
Lift handset and press RECORD button to start recording. The display will read “Confirm”
with options of NO (Down Arrow) or YES (Select Key).
g.
Press Yes.
h.
The unit will play a message of “Please record a greeting after the tone.”
i.
Speak your greeting into the handset.
j.
Press STOP button to end recording of greeting.
k.
Press MENU to exit.
5.1.2.1
Reviewing your OGM.
To review your OGM, follow steps a. through e. of 5.1.2 and then press PLAY.
5.1.2.2
Erasing your OGM.
To erase your OGM, follow steps a. through e. of 5.1.2. Press RECORD and then immediately press
STOP. This will load the factory default greeting.
5.1.2.3
Changing your OGM.
Follow the steps in 5.1.2. and the newly recorded OGM will automatically replace the old one.
5.1.3
Setting Your Telephone's Pickup Delay
The Pickup Delay setting determines how long the phone will ring before picking up an incoming call.
NOTE: Turning Toll Saver ON at this phone will override the Pickup Delay setting for incoming calls,
however when a call is transferred from another extension in the system, it will follow the Pickup
Delay setting.