Cortelco 2750 User Manual
Page 34
29
5.2.11
Choosing the Zero-Out Action
When the caller dials “0” during an Auto Attendant message, the default setting is that it plays the
Zero-Out OGM. However, it is possible to choose a different Zero-Out action. The 2750 may be set to
transfer to a particular extension, ring all the phones with a particular distinctive ring, or even disallow
the caller to zero-out. To choose a Zero-Out action.
a.
Press MENU
b.
Press DOWN ARROW repeatedly until “Answer Setting” appears in the display.
c.
Press the soft key under ENTER. “Ans System: ON” will appear in the display.
d.
Press DOWN ARROW repeatedly until “Advanced Setting” appears in display.
e.
Press the soft key under ENTER.
f.
Press DOWN ARROW until “Zero Out Action” appears in display.
g.
Press the soft key under ENTER, “AA ZERO-OUT OGM” will appears in the display
h.
Press the soft key under CHANGE until the desired Zero-Out Action is displayed.
i.
Press MENU to exit.
5.2.12
All Transfer Feature
The 2750 can transfer calls to all phones with one of nine personal rings. After hearing an Auto
Attendant OGM, if the caller dials 30 through 38, then all phones will ring with that particular
distinctive ring.
5.2.13
Leave a Message at the Auto Attendant
The AA Messages do not have any beep at the end, and will not normally record any message.
However, if the caller presses # while listening to an AA OGM, the phone will play its ANS OGM and
allow the caller to leave a message.
5.2.14
Set Night Message by Line
The night message may be disabled on any or all lines, so that the day message will play at all hours.
To program the feature follow the steps below.
a.
Press MENU
b.
Press DOWN ARROW repeatedly until “Answer Setting” appears in the display.
c.
Press the soft key under ENTER. “Ans System: ON” will appear in the display.
d.
Press DOWN ARROW repeatedly until “Advanced Setting” appears in display.
e.
Press the soft key under ENTER.
f.
Press DOWN ARROW until “Night Msg by Ln” appears in display.
g.
Press the soft key under ENTER, “L1 NIGHT MSG:ON” will appears in the display
h.
Press DOWN ARROW until the desired Line is displayed.
i.
Press the soft key under CHANGE to either turn OFF or ON.
j.
Press MENU to exit.