Cortelco 2750 User Manual

Page 30

Advertising
background image

25

5.1.6.1

Setting the remote code

a.

Press MENU

b.

Press DOWN ARROW repeatedly until “Answer Setting” appears in the display.

c.

Press the soft key under ENTER. “Ans System: ON” will appear in the display.

d.

Press DOWN ARROW repeatedly until “

Remote Code:****

appears in LCD Display.

e.

Press the soft key under CHANGE

if you wish to change the Remote Code of this telephone,

and then enter a 4 digit number

f.

Press MENU to exit

5.1.6.2

Checking Messages Remotely

a.

Dial the 2750 from a remote location.

b.

When the OGM begins playing, enter the Remote Code.

c.

Enter the desired remote commands. (See 5.3.15)

d.

Hang up when finished.

5.1.7

Setting Message Length

The 2750 has only 60 minutes of recording time available for recording the outgoing and incoming
messages. It is important to control the message length. There are three settings for this option.
UNLIMITED(default) - Callers can record a message of any length, up to the available memory in your
phone.
1 MINUTE - Callers can only record a message up to 1 minute long.
ANNC ONLY - callers will hear the OGM, but will not be able to record a message.

To program the message length follow the steps below.
a.

Press MENU

b.

Press DOWN ARROW repeatedly until “Answer Setting” appears in the display.

c.

Press the soft key under ENTER

d.

Press DOWN ARROW repeatedly until “Message Length” appears in the display.

e.

Press the soft key under ENTER

f.

Press the soft key under CHANGE to set message length

e.

Press MENU to exit.

5.2

Auto-Attendant

The 2750 may be set as an Auto Attendant. A 2750 set as an Auto Attendant will answer incoming calls
and transfer them to other extensions in the system. Each Auto Attendant can only answer one line at a
time, so busy offices may require more than one Auto Attendant.
To use the 2750 as an Auto-Attendant perform the following steps.
1.

Set the phone's answering system to “AA”

2.

Record the Auto Attendant Day OGM, Night OGM, and Zero-Out OGM.

3.

Set the night timer, which will determine the hours that callers will hear the Night OGM.

4.

Choose how many times you want the Auto Attendant to ring before picking up calls.

Advertising