Xoro HSD 4000 - Manual (Page 100)

CONNECTIONS
Connecting to an external decoder or a power amplifier
When DVD discs recorded in DOLBY digital, MPEG audio or other formats are played, corresponding
bit stream is output from the player’s OPTICAL and COAXIAL digital audio output connector. When
the player is connected to an external decoder or a power amplifier, you can enjoy theater-quality at
your home.
Notes when connecting the optical digital cable:
Remove the protective cap from the connector, insert the plug-ins of DVD and amplifier optical slot
so that the configurations of both the cable and the connector match. Keep the protective cap and
always reattach the cap when not using the connector to protect against dust and laser beam.
Concerning the audio output setting for the unit's coaxiai digital audio output connector
Disc Sound recording format Digital output setting
DVD
Dolby digital
PCM (44.1 KHz sampling)’'
Raw
OFF
DTS
Raw
OFF
Linear PCM PCM (44.1 KHz sampling)
Other PCM (44.1 KHz sampling)
CD Linear PCM PCM (44.1 KHz sampling)
Sound having 96 KHZ sampling is converted to 48 KHZ sampling when It is output from the coaxial digital audio
output connector
Notes:
• Please set the digital output as RAW
• Caution forthe coaxial digital audio output connector: do not connect an amplifier with a Coaxial or
optical digital input connector) which does not contain the Dolby digital or MPEG audio decoder
otherwise it may be harmful to your ears and damage your speakers