Aiphone RAX R24/A - Manual (Page 13)

(B) RAX Central Exchange Unit Mounting Instructions
1. Central Exchange Unit shall be wall mounted
approximately 1.5 m (5 feet) high from the floor.
2. Install the mounting bracket to the gang boxes
with the provided screws.
Anchor the bracket with the provided screws or
bolts at 4 points.
3. Mount the RAX Central Exchange Unit onto the
bracket, and connect wires for both stations and
AC power line.
4. Replace the covers.
41.75 mm(1-5/8")
TOP VIEW MOUNTING BRACKET
REGULATOR UNIT
MOUNTING 2- OR 4-GANG BOX
HARDWARE (FOR STATION CABLE)
1-GANG BOX
(FOR AC POWER LINE)
GROUNDING
WIRE
ANCHORING POINTS (2)
FOR RAX UNIT
CONNECTING WIRES
FOR STATIONS
RAX-24 TERMINAL LOCATIONS
WALL
SCREW
CZl
-10 cm or more
(4")
For easy instaliation/removal of the
cover, leave space of 10 cm (4")
or more between a side of RAX
unit and the wall.
1101 — |33l Intercom station terminals
|p^[ , , |F^ , Paging/remote control terminals
NOTES: (1) Intercom station terminals on each Central Exchange Unit are;
^ in RAX-8
^ in RAX-16
QO] - [33] in RAX-24
(2) The number terminals 110| — [ij] , — [T^ .. and up to
'pair terminals' of master/sub.
-11-
Remote control output terminals
Power terminals for paging.
can be used as