Aiphone RAX R24/A - Manual (Page 24)

3. Call Transfer;
To transfer a call from one station to another, press [ ® | (MEMORY), number of station where call is to be transferred
and, after communication line is established, press | 7 | (TRANSFER) button.
4. Call Holding;
To place present communication on HOLD, press (MEMORY) button. Press [~^ (MEMORY) button orfV] (OFF)
button or hang up handset in RA-D to restore connection to station on HOLD and resume conversation.
5. Secretary Transfer;
Press I ® I (MEMORY) button and station number buttons to have your calls answered in your absence by your secretary
or another person you want to receive your calls. -»• Call LED flickers.
Press I 0 I (CLEAR) and| 7 | (TRANSFER) buttons to cancel secretary transfer mode.
6. Press-to-Talk Operation;
When you communicate with a station situated in a noisy area, you may press [T] (TALK) button to talk and release
to listen.
7. Master/Sub Communication;
For communication between a paired master & sub stations, press | | button to call and communicate as soon as the
line is established.
After communication, press | • | (OFF) button at either station or hang up handset in RA-D.
8. All Page;
To page all zones in your system through speakers, pressfx] (PAGE) button and (ALL PAGE) button, then depress
and hold | t | (TALK) button and page. TALKBACK IS NOT AVAILABLE IN ALL PAGE MODE. The paged person
may reply to the paging person from nearest station by pressing | 6 | button.
Press'! * * ! (OFF) button or hang up handset in RA-D when page message is completed.
9. Zone Page;
To page one selected zone in your system through speakers, press j | (PAGE) and zone number (| 1 j , | 2 j, | 3 j or
I 4 I ) buttons, then depress and hold down | t | (TALK) button and page.
When talkback is included, release fT] (TALK) button for reply.
When talkback is not included, the paged person any reply from the nearest station by pressing [~6~| button.
10. All Call;
To page through individual stations, press j 5 j and make announcement by depressing and holding [
t
| (TALK) button.
The person paged can go to the nearest station, press | 5 | button and can reply to the All Call.
The All Call Call-back Automatic Connection is valid for about 30 second, after the announcement is completed.
* Operational notes:
(1) For handset communication, hold the RA-A bottom side to your ear and keep the bar switch in depressed position.
(2) Communication should be made within an operable distance.
I n RA-A, talk toward the microphone from the front for best results.
(3) Do not put papers or books near RA-A and RA-D units to ensure best performance.
(4) In RA-D, TALK button in handset works for [ t | (TALK) button on the dial key pad.
-22-