Aiwa XR-H330MD - Manual (Page 14)

MD PLAYING
■ CD EDIT/
CHECK
■PRGM
■ RANDOM/
REPEAT
Numbered
buttons
SHIFT
1 Press MD.
2 Insert a disc into the disc drive with the label side
up and in the direction of the arrow.
"TOC READ" is displayed while the unit reads the data on the
inserted disc. Then the information contained in the disc is
displayed.
Display in stop mode
Total number Track number
of tracks (displayed up to the 20th track)
Total playing time
3 Press
Play begins.
Display in playback mode
Track number
being played
To stop play, press ■.
To pause play, press
II. To resume play, press again.
To search for a particular point during playback or in pause
mode, keep ◄◄ or ►► pressed and release the button at the
desired point.
To skip to the beginning of a track, press ◄◄ or ►►
repeatedly or turn MULTI JOG until the desired track is displayed.
To eject a disc, press ± MD EJECT and pull the disc out.
Even when the power is off, press ^ MD EJECT to eject a disc.
Then, the power is turned on, and the disc will be ejected.
Do not hold the disc while ejecting it, otherwise a disc cannot be
inserted the next time. If this happens, turn off the power and
disconnect the AC power cord. Then connect it again.
To start play when the power is off (Direct play function)
Press MD when the disc is loaded. The power is turned on and
play of the inserted disc begins.
To select a track directly with the remote control
Press numbered buttons 0-9 and +10.
Example:
To select the 25th track, press +10 twice and 5.
To select the 10th track, press +10 and 0.
Track number being
played flashes.
If you press +10, press next numbered button within 4 seconds.
To play a disc at double speed
Keep pressed for 2 seconds during playback.
To cancel double speed playback, press ◄►, ◄◄, ►►, or ■.
To check the remaining time
During MD playback or in pause mode, press DISPLAY on the
main unit or press CD EDIT/CHECK on the remote control while
pressing SHIFT. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
• During random or programmed play, the remaining time is not
displayed.
To check the track title
During MD playback or in pause mode, press DISPLAY on the
main unit. The title of a track being played is displayed. If the
track title is not registered, the track number is displayed. To
restore the playing time display, press DISPLAY repeatedly.
To check the disc title
In stop mode, press DISPLAY on the main unit. The title of a
disc is displayed. If the disc title is not registered, "No Title" is
displayed. To restore the total playing time display, press
DISPLAY again.
; ! : •••:• :: .■ ;• : W k !!!-;"
Elapsed playing time of the track being played
Do not attempt to insert an MD when the power is tunrned off.
Doing so may cause malfunction.
Nothing other than an MD should be inserted into the disc drive.
Otherwise the disc may become scratched, causing a
malfunction or safety hazard such as an electric shock.
Do not attempt to insert another MD while a disc is already
inside the drive.
Do not tilt the unit with a disc inserted. Doing so may cause
malfunction.
14 ENGLISH