Recording three cds continuously, Recording level, 2 press cd and ioad the cds on the trays – Aiwa XR-H330MD User Manual
Page 22: 3 press mode twice, C-.. nark, 5 within 10 seconds, press enter, 6 press • md rec, 7 press ii to start recording, To stop recording, Riecording three cds continuously
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECORDING THREE CDS CONTINUOUSLY
# MD REC is used for recording. In this case, the sound of the
CD is carried toward the MD as analog signals.
1
2
To add Index marks during recording
Press ENTER at the desired point during recording.
Or, press MDTITLE/ENTER on the remote controi while pressing
SHIFT.
Recording level
This unit sets the recording level automatically.
There may be a case where index marks are not registered
accurately even if the "AUTO MARK" is selected.
' You can not register index marks without registering track
numbers.
' If you pause recording, the track number does not increase.
1 Insert a recordable MD into the disc drive with
the label side up and in the direction of the arrow.
2 Press CD and ioad the CDs on the trays.
3 Press MODE twice.
"Mark MODE?" is displayed for 10 seconds.
c - . .
N a r k
" ‘ i
j'**' sif-.r-cir’
■ • ■• aHHBE
4 Within 10 seconds, press ENTER and turn MULTI
JOG to select an index mark mode.
To register index marks automaticaiiy at the beginning
of each track, select "Mark:AUTO?".
To
register
index
marks
every
5
minutes,
select
"Mark:TIME?".
To register without index marks, select "Mark:OFF?".
5 Within 10 seconds, press ENTER.
AUTO MARK (Auto mark) function
- When recording from a CD with CD ► MD, the index mark
information recorded on the CD is copied as it is.
Selected mark mode
CD
2nd
track
3rd
track
4th
track
ill.... ill........................................ It
31
Recording (MD)
2nd
track
3rd
track
4th
track
6 Press • MD REC.
The unit enters the standby mode. Wait until "CD" is displayed.
7 Press
II
to start recording.
Recording begins.
When all the CDs on the trays finish playing, the recording
stops automatically.
To stop recording
Press ■.
When the recording finishes, "TOC EDIT" is displayed and
the data concerning the contents of the recording are
registered.
▲: Index mark
When recording CDs or other sources with
9
MD REC, if there
is a blank section lasting more than 2 seconds, an index mark
is automatically registered when a sound signal is input in the
following time.
Blank
Sound source
Recording (MD)
I
i
2nd
1 track
3rd
track
4th
track 1
Index mark
22
ENGLISH