Aiphone My-Cu - Manual (Page 6)

PanTilt IE-8MD with 2 video-monitors
Single PS-18C or PS-18D powers both lE-
8MD and MY-CU, locating an MYH-CU on
75m, 245’.
One to 5 IE-8HD with 4-wire cable, station-to-
station. PanTilt MY-CU monitor with 6-wire cable
separately sheathed. PanTilt door requires 2
parallel wires, connected directly to MY-CU
monitor.
■k
Connecting jumpers
In single PS-18C(D) sourced system, a
D1 - D1 jumper is only required. Add another
D2 - D2 when IF-DA is installed.
Install a third jumper on E - E1, when a
separate audio & video power source is used.
STATION #
1
IE-8MD &
4
IE-3HD &
I Wiring distance MY-CU to PanTilt door
Diameter 0.65mm 0.8mm 1.0mm
Distance 50m 70m 100m
AWG 22AWG 20AWQ 18AWG
Distance 165’ 230' 330’
MY-CU to farhest MYH-CU (2 monitors)
Diameter 0.65mm 0.8mm 1.0mm
Distance 35 m 50m 75m
AWG 22AWG 20AWG 18AWG
Distance 115’ 160’ 250’
IE-8MD to audio door station
Diameter 0.65mm 0.8mm 1,0mm
Distance 150m 230m 360m
AWG 22AWG 20AWG 18AWG
Distance 500’ 750’ 1,180’
Two farthest stations (any pair)
Diameter 0.65mm 0.8mm 1.0mm
Distance 75m 120m 190m
AWG 22AWG 20AWG 18AWG
Distance 250’ 380’ 630’
MY-CU/1E-8MD to power supply PS-18D(C)
Diameter 1.0mm AWG 18AWG
Distance 5m Distance 16’
-
6
-