Notes, Fi wiring diagrams – Aiphone ROAMER WP100A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
fi WIRING DIAGRAMS
MC-60/4A WITH V\riRELESS ROAMER SYSTEM
- With MC-A/A and Amplifier -
ANA9500 Phone Base
IF P.A. AMP HAS ONLY 1 INPUT AVAILABLE
FOR PAGING
WP100A
NOTES:
1. All communication lines are shown wired to the
Roamer phone, allowing the phone to answer a
call on any intercom line. The ring jumpers allow
the MC-60/4A's to ring the ANA9500 by
selecting channel 4. Press "TALK" on the phone
to answer the call.
2. To call from the phone to the MC-60/4A system,
Press "TALK" and channel number (1 through 4).
3. MC-60/4A handsets must be wired in blocks
with maximum 10 stations per block.
Advertising