Aiwa XR-M1000 - Manual (Page 9)

SETTING A NEW EQUALIZATION CURVE
MANUALLY MEMORIZING THE NEW EQUALIZATION
CURVES
The equalization curve can be customized to suit your preference.
1 Press FREQ DOWN or FREQ UP.
2 Within 4 seconds, press FREQ DOWN or FREQ
UP repeatediy to seiect the frequency you want
to adjust.
The selected frequency indicator flashes for 4 seconds.
tJi
M5
3 Within 8 seconds, turn MULTi JOG to adjust the
levei of the seiected frequency.
Up to 5 customized equalization curves can be stored as the
manual modes Ml - M5.
1 Set a new equaiization curve with FREQ DOWN,
FREQ UP and MULTi JOG.
See “SETTING A NEW EQUALIZATION CURVE MANUALLY”.
The created curve is displayed for 8 seconds.
GC
U1
N
□ .
<
3
a
u
o
(L
<
EC
O
2 Within 4 seconds, press ENTER.
“M 1” indicator flashes on the display for 4 seconds.
¿•«til.
4 Repeat steps 2 and 3 to compiete the equaiization
curve.
• If this step is not completed within 4 seconds, press GEQ
first to display “GEQ ON”. Then press ENTER within 4
seconds.
3 Within 8 seconds, turn MULTI JOG to select one
of the manual modes M1 - M5 to store the curve.
To cancel the graphic equalizer
Press GEQ once or twice so that ” GEQ OFF” appears on the
display of the stereo receiver.
When using the remote control, press GEQ repeatedly until ”GEQ
OFF” is displayed.
4 Within 8 seconds, press ENTER.
The new equalization curve is stored.
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual
modes M1 - M5 within 4 seconds.
ENGLISH
9