Aiwa NSX-A10 - Manual (Page 14)

OTHER CONNECTION
CONNECTING OPTIONAL
EQUIPMENT
Refer to the operating instructions of the connected equipment
for detaiis.
• The connecting cords are not supplied. Obtain the necessary
connecting cords.
• Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
■ ' ' . »
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (digital
amplifier, DAT deck, MD recorder, etc.).
Remove the dust cap (D from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug ® to the CD DIGITAL
OUT (OPTICAL) jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
LISTENING TO EXTERNAL SOURCES
To play equipment connected to the VIDEO/AUX jacks, proceed
as follows.
1 Press the VIDEO/AUX button.
VIDEO appears on the display.
2 Play the connected equipment.
To change a source name in the dispiay
When the VIDEO/AUX button is pressed, VIDEO is displayed
initially. It can be changed to AUX or TV.
With the power on, press the POWER button while pressing the
VIDEO/AUX button.
Repeat the procedure to select one of the names.
GENERAL
SPECIFICATIONS
J
Main unit CX-NA10
FM tuner section
Tuning range 87.5 MHz to 108 MHz
Antenna Wire antenna
AM tuner section
Tuning range
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
Antenna Loop antenna
Ampiifier section
Power output 7.5 W/Ch (50 Hz-20 kHz, THD
less than 1 %, 6 ohms)
Total harmonic distortion 0.3 % (5 W, 1 kHz, 6 ohms, DIN
AUDIO)
Inputs VIDEO/AUX: 400 mV
Outputs SPEAKERS; accept speakers of
6 ohms or more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
Cassette deck section
Track format 4 tracks, 2 channels stereo
Frequency response 50 Hz - 10000 Hz
Recording system AC bias
Heads Deck 1: Recording/playback/
erase head x 1
Deck 2: Playback head x 1
Compact disc player section
Laser
Semiconductor laser (X = 780 nm)
D-A converter 1 bit dual
Signal-to-noise ratio 90 dB (1 kHz, 0 dB)
Harmonic distortion 0.03 % (1 kHz, 0 dB)
Wow and flutter Unmeasurable ,
General
Power requirements 120VAC, 60Hz
Power consumption 40 W
Dimensions of main unit 260 X 308 X 335 mm
(W X H X D) (10 74X12,74 X 13 V4in.)
Weight of main unit 4.4 kg (9 lbs 11 oz)
Speaker system SX-N A10
Cabinet type 2 way, bass reflex (magnetic
shielded type)
Speakers Woofer:
120 mm (4 74 in.) cone type
Tweeter:
10 mm (’7 з 2 in.) ceramic type
Impedance 6 ohms
Output sound pressure level 87 dB/W/m
Dimensions (W x H x D)
220 X 302 X 238 mm
(B ^/4X12X8 7a in.)
Weight 2.5 kg (5 lbs 8 oz)
Specifications and external appearance are subject to change without
notice. ' '
1 3
ENGLISH