Aiwa NSX-A10 - Manual (Page 9)

PROGRAMMED PLAY BASIC RECORDING
Up to 30 tracks can be programmed from any of the inserted
discs.
uu
z z
p
0-8
D UJ
utr
Use the remote control.
1 Press the PRGM button while pressing the SHIFT
button in stop mode.
PGM is displayed.
• n n
• u u IMl
I
I l\//
( I I I \c
Press one of the DISC DIRECT PLAY buttons to
select a disc.
The selected disc is indicated in red on the display.
Go to the next step when the tray stops rotating.
Press the numeric buttons and the +10 button to
program a track.
Example;
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.
Program number
¡-‘b
/'V “
1
Selected track number
Total playing time of
the selected tracks
^ bbi'1 L
Total number of
selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press the ► PRESET button to start play.
To check the program
Each time the ◄◄ or ►► button is pressed in stop mode, a
disc number, track number, and program number will be
displayed.
To clear the program
Press the ■ CLEAR button in stop mode.
To add tracks to the program
Before playing, repeat steps 2 and 3. The track will be
programmed after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
' During the programmed play, the EDIT/CHECK, DISC
CHANGE, DISC DIRECT PLAY and numeric buttons do not
function.
’ RANDOM play is not performed during programmed play.
Preparation
• Wind up the tape to the point recording starts.
• Note that recording is done on only one side of the tape.
• Use only normal (type I) tapes.
1 Insert the tape to be recorded on into deck 1 and
push the cassette holder to close it.
2 Get ready for the source to be recorded.
To record from a CD
Press the CD button and load a disc.
To record from a tape
Press the TAPE button. Then, insert the original tape into deck
2 and play it.
To record from a radio broadcast
Press the TUNER/BAND button and tune in to a station.
To record from the connected source
Press the VIDEO/AUX button and play it.
3 Press the 9 button to start recording.
The ► button is depressed simultaneously.
When recording from a CD. playing and recording start
simultaneously from the first track.
To stop recording
Press the ■/£ button on deck 1.
To pause recording
Press the II button on deck 1.
To resume recording, press it again.
To record selected tracks of the CD
Before pressing the 9 button, program the tracks.
To start recording precisely (except when recording from
a CD)
Before pressing the # button at step 3, press the II button on
deck 1. Then, press the • button. The deck enters recording
pause mode. When you wish to start recording, press the
II
button again.
To record part of the CD
When the • button is pressed, recording always starts from the
first track. To start in the middle of a track, play the CD first and
press the II button for CD at the point you wish to start recording
from. Then, press the • button. The pause mode for CD button
is released automatically and recording starts.
Do not press the buttons on deck 2 during recording.
ENGLISH
8