Denon AVR-2801 - Manual (Page 21)

ENGLISH
21
3
4
ENTER
Select the digital input jack to be assigned to the input source.
• To select the input source
• To select the digital input jack
Select “OFF” for input sources for which no digital input jacks are used.
* If “Yes” is selected for “Default”, the settings are automatically reset to the default values.
Enter the setting.
The System Setup Menu reappears.
NOTE:
• “PHONO”, “CDR/TAPE” and “TUNER” cannot be selected on the Digital Inputs screen.
Setting the on-screen display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1 At the System Setup Menu select “On Screen Display”.
2
ENTER
Switch to the Digital In Assignment screen.
2
3
4
ENTER
ENTER
Switch to the On Screen Display screen.
Select “ON” or “OFF”.
Enter the setting.
The System Setup Menu reappears.