Surround, 36 10 surround, English – Denon AVR-2801 User Manual
Page 36: Before playing with the surround function, Press the t. tone button, Select the speaker whose level you want to adjust
ENGLISH
36
10 SURROUND
Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment
can be performed with the system setup (see page 19) or from the remote control unit, as described below.
• Adjusting with the remote control unit using the test tones is only possible in the “Auto” mode and only effective in the DOLBY SURROUND
modes. The adjusted levels for the different modes are automatically stored in the memory.
1
Press the T. TONE button.
T.TONE
2
Test tones are output from the different speakers. Use the
channel volume adjust buttons to adjust so that the volume of
the test tones is the same for all the speakers.
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below.
TUNING
BAND
TITLE
MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE
DVD
SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
SYSTEM
SETUP
SURROUND
PARAMETER
CH SELECT
SELECT
ENTER
1,3
2
3
After completing the adjustment, press the T. TONE button
again.
T.TONE
1
Select the speaker whose level you want to adjust.
CH.VOL
CH SELECT
ENTER
(Main unit)
(Remote control unit)
2
Adjust the level of the selected speaker.
Only adjustable when the
channel is selected with the
CH.VOL buttons on the main
unit.
The channel switches as shown below each time the button
is pressed.
SELECT
(Main unit)
(Remote control unit)
FL
1
C
1
FR
1
SR
1
SL
1
FADER
1
SW
1
1
DVD
START
LEARNED/TX
SPEAKER
TUNING
BAND
TITLE
MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE
DVD
SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND
DIRECT
DSP SIMULATION
5CH STEREO
STEREO
INPUT MODE
ANALOG
EXT.IN
MUTING
MASTER VOL.
VOLUME
DISC SKIP+
SYSTEM CALL
POWER
VDP
TUNER
SHIFT
TV/DBS
PHONO
VCR-1
CD
CHANNEL
VCR-2/V.AUX
TV/VCR
AVR/AVC
VIDEO
DVD
TV
AUDIO
VDP
VCR
CD
CDR/MD
DECK
SYSTEM
SETUP
SURROUND
PARAMETER
CH SELECT
SELECT
RC-881
1
2
3
4
SET
A / B
CALL
OFF
ENTER
ON / SOURCE
5
6
7
8
9
+10
0
2
CDR / TAPE
(Remote control unit)
(Remote control unit)
(Remote control unit)
NOTES:
• The adjustment range for the different channels is +12 dB to
–12 dB.
• When using the DIRECT mode, the sound from the subwoofer
can be cut by lowering the SW (subwoofer) setting one step
from –12 dB (setting it to “OFF”).