3DLABS Oxygen GMX User Manual
Page 12
Installing Hardware
4
3Dlabs Oxygen
GMX User’s Guide
4.
Attach the anti-static strap to your wrist, and attach the other end to a bare,
conductive (as opposed to painted or sticker-covered) area of your
system’s chassis.
5.
Remove the card from its anti-static packaging. Write down the serial
number for registration and future use.
6.
Place the card into the AGP slot, and seat it firmly. See your system
documentation for instructions on securing the card to the chassis. Loose
cards and connections can cause grounding and operating problems.
7.
Remove the anti-static strap and replace the cover on your system.
8.
Connect the video cable from your monitor to the video connector on the
card.
9.
Plug in and start up your system, including peripherals, and log in to
Windows NT.