3xLOGIC VIGIL Client - Manual (Page 101)

If this option is enabled, a icon will appear in the Playback window(up-left) as well as the
left-side Playback edge controls . This icon indicates that disk caching is incomplete.It may be
clicked in the left-hand edge control to cancel disk caching for the active playback footage.
It is replaced with the icon when caching is complete.
Cache Location
To configure this setting, clicking the Settings button. The location
where the cached files will be stored. VIGIL Client deletes Cache files
automatically when the cache is full.
Max Cache Size
To configure this setting, clicking the Settings button. The maximum
amount of hard drive space that will be used by VIGIL Client Playback
Disk Caching. The default cache size is 528 Mb.
Note: If the cache is located on the same drive as the operating system, ensure there is
enough available disk space for the operating system and other programs to function prop-
erly.
Cache all Frames in Back-
ground
When video playback is paused, all frames in the video will be cached instead of the default 1
minute cache.
Show Site and Camera Name Displays the site and camera name for each camera when in Full Screen mode.
Audit Exported Footage When enabled, every export will be logged to the file %SYSTEMDRIVE%\VigilClientExports.log.
Auto Display POS/ATM Data
Form on Playback
When enabled, the user will be presented with a POS/ATM Data form when viewing playback on
applicable cameras.
Enable On-Screen Display on
Playback
When enabled, camera playback streams will feature On-Screen Display data.
Default Synchronized Play-
back
When enabled, multiple streams loaded for playback will be synchronized during playback.
Disable this feature to improve playback load times and enable the playback sync pool feature
where specific camera streams currently in the playback window can be synced to one another
while others can remain independent of the synchronization pool.
Synchronized Button Sets
Camera Timestamp
Enabling this feature will cause the Synchronization button to also set the selected camera's times-
tamp as the principle timestamp for the synchronization pool.
Example: A user already has seven playback windows opened, six of which are synchronized. The
user selects the Synchronization button on the seventh stream, synchronizing it with the other
streams. With the Synchronized Button Sets Camera Timestamp feature enabled, all open play-
back windows will start at the time defined by the 7th cameras timestamp when it was added to
the sync pool.
Select Priority Audio Channel
on Playback
When enabled, if a camera is polled for playback, VIGIL Client will automatically playback that
camera's priority audio channel along with the footage. If this feature is not enabled, audio will
be disabled on playback.
©2014 3xLOGIC Inc. | VIGIL Client - User Guide - 95 -