3xLOGIC VIGIL Client - Manual (Page 27)

5 Servers Window
A Server in this context is a Windows PC configured as a VIGIL Server. The purpose of setting up servers is to make connecting to
local and remote servers more efficient than remembering IP addresses or DNS names. Server information is stored by a description
that is created by the user.
Note: If Managed by VCM is enabled in the Settings, the Servers list will be populated by the VCM Server that VIGIL Client
connects to.
The Servers window displays a list of saved servers. It also displays their current connection status and offers different buttons to
interact with the servers.
Disconnected from the server.
Connected to the server.
Connect All
Connects to all configured servers. If a
server does not have a username and
password stored in the settings, it will
prompt for the username and password.
Connect
Connects to the selected server only. If
the server does not have a username and
password stored in the settings, it will
prompt for the username and password.
Connect As…
Connects to the selected server only.
However, it will automatically bypass
the stored username and password and
will prompt one for this connection.
Disconnect
Opens a prompt asking if you want to disconnect from the
currently selected server.
Add
Opens the Server Settings window where you can add a
server.
Remove
Opens a prompt confirming if you wish to remove the cur-
rently selected server from the server list.
Edit
Opens the Server Settings window for the currently
selected server allowing you to change the stored settings.
VIGIL Server Settings
Opens the VIGIL Server Settings window for the currently
selected server. You must be connected to the server with
administrative privileges for this to be available.
Remote Register
Opens the Registration window for the currently selected
server.
©2014 3xLOGIC Inc. | VIGIL Client - User Guide - 21 -