3xLOGIC VIGIL Client - Manual (Page 28)

5.1 Add / Edit a Server
Click the Add or Edit (with a Server Selected) buttons from the Servers window to open the Server Settings window. These options
are only available in Local mode.
Use VIGIL Con-
nect
Enable this to use a VIGIL Connect alias or
serial number instead of an IP address. VIGIL
Connect aliases are case sensitive so be sure
it is an exact match of the alias configured
on the desired server.
IP/DNS Name
The IP address or DNS name of the server.
To use a dial-up connection, leave this set-
ting blank and Enable Use Dial-up, select the
dialup connection to use from the drop-down
menu.
TCP/IP Ports
Open a window to change the default TCP/IP
port settings if they have been altered on the
server. (See below)
User Name/
Password
The user name and password that VIGIL
Client will use to log in to the server. If
these are left blank, a prompt will be opened
during connection for the user name and pass-
word to be input manually.
Use Dialup
Enable to use a dialup connection to connect
to a server.
Note: At least one Windows dialup
connection must be set up for this
feature to become enabled.
Check Net-
work Status
Check the connection to the Server on a set
interval and mark it as Offline if a set
number of timeouts occur.
Description
Enter a site description to identify the in
Client or check-off Use Site Name for
Description to name configured on the VIGIL
Server itself as its description.
Check for
Server Alarms
Check the Server for Alarms on a regular
interval. This option is enabled by default.
Check for
Live POS/ATM
Update POS/ATM data from the server on a
set interval. This option is enabled by
default.
- 22 - ©2014 3xLOGIC Inc. | VIGIL Client - User Guide